No Power Spindle Assembly Trimming Belt Drill Chuck Set DIY Woodworking Cutting

Description

Specification:
Cutting ability
Unpowered spindle
Cutting depth
10 (mm)
Saw blade size/diameter
90 * 10 (mm)
No load speed
10000 (RPM)
Scope of application
Making small saw
Power type
No power
Features:
- The shipper and the synchronous wheel are equipped with the gasket isolation of 1mm to lock tightly.
- The rotation is smooth and without phase grinding, and the accuracy is good.
- No power spindle, precision machining by grinding machine, precision of 0.005mm, that is, a high-precision spindle with less than one wire.
- DIY bench drill, bench mill, table saw and so on.
- Through the connecting rod, the shaft sleeve link is eliminated, and the drill clamp is installed directly, so the accuracy is higher.
- The non-powered spindle (Mohs drill chuck connecting rod) is precision machined with a grinding machine with an accuracy of 0.005MM. Can be used to make bench drills, bench mills, table saws, etc.
-
The width of synchronous belt is 10mm, matching XL synchronous wheel, rubber material, pitch is 5.08mm.
The circumference of 120xl synchronous belt is 304.8mm with 60 teeth
Installation tips:
1. Pay attention to the mounting direction of the bearing, and carefully look at the description diagram or video.
2. Do not damage the bearing blindly. Patience and carefulness are the key points of mechanical work.
3. Various methods: to activate the brain and complete the assembly.
4. The sliding block and the contact surface of the synchronous wheel shall be separated by gasket to prevent phase grinding. The gasket is small. Don't lose it.
Package Included:
#1
:
1 X XL10T 5mm hole synchronization wheel
1 X 120XL Timing belt
1 X Wrench
#2:
1 X Drill chuck connecting rod
1 X XL20T 10mm hole synchronization wheel
1 X 10mm hole slider (including 2 bearings)
1 X 0.6-6mm
B10
Drill Chuck
1 X M10 Shaft sleeve
(including shaft socket wrench, synchronous wheel wrench, drill clamp key)
#3:
1 X Drill chuck connecting rod
1 X XL20T 10mm hole synchronization wheel
1 X 10mm hole slider (including 2 bearings)
1 X 1.5-10mm
B12
Drill Chuck
1 X M10 Shaft sleeve
(including shaft socket wrench, synchronous wheel wrench, drill clamp key)
#4:
1 X Drill chuck connecting rod
1 X XL20T 10mm hole synchronization wheel
1 X 10mm hole slider (including 2 bearings)
1 X 1.5-13mm
B16
Drill Chuck
1 X M10 Shaft sleeve
(including shaft socket wrench, synchronous wheel wrench, drill clamp key)
#5:
1 X Drill chuck connecting rod
1 X XL20T 10mm hole synchronization wheel
1 X 10mm hole slider (including 2 bearings)
1 X 0.3-4mm
JTO
Drill Chuck
1 X M10 Shaft sleeve
(including shaft socket wrench, synchronous wheel wrench, drill clamp key)
#6:
The
JTO
shank
#7:
The
B10
shank
Shipping
1
.
If you need to buy in bulk, please contact, we will reply in 24 hours
.
2.
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
3.
Usually product Reaches after about 12-45 business days depending on destination.
If you have not received your shipment within 45 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Refund or resend product will be offered if item still not received.
4.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important.
We ask you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns
.
It is impossible to address issues if we do not know about them!